Technical Data - Truma SecuMotion Mode D'emploi

EisEx regulator heating
(part no. 53101-01)
Angle union 90°
(part no. 50020-56000)
Gas remote switch
For turning off the gas supply
from inside the vehicle
GS 8 (part no. 57013-01)
GS 10 (part no. 57023-01)
Screwing tool
(part no. 50020-61500)
Test hose
(part no. 50020-61200)
Extension kit
required when gas cylinders
separated by more than 100 cm
(part no. 50020-61100)

Technical data

measured according to
EN 12864 or under Truma test
conditions
Gas type:
Liquid gas (propane/butane)
Inlet pressure p1:
0.3 – 16 bar
Outlet pressure p2:
30 mbar
Flow rate Qn:
See printing on the regulator
Gas-flow monitor's switch-off
point:
27 mbar or 125% Qn
Regulator inlet:
Male threads M20 x 1.5 (G.13)
Regulator outlet:
Cutting-ring screw fitting
8 or 10 mm
Recommended tightening
torque:
3 – 5 Nm for nut M20 x 1.5
(G.13)
Declaration of conformity:
The Truma SecuMotion gas-
pressure regulator complies with
the pressure-device directive
97/23/EC under application of
EN 12864/D and the directive
2004/78/EC exhibit VIII „Safety
Requirements for LPG-Operated
Combustion Heating Devices".
Product Identification
Number:
CE-0085BQ0102.
The right to effect technical
modifications is reserved!
15