Operating Instructions; Taking Into Operation - Truma SecuMotion Mode D'emploi

Operating instructions

Taking into operation

• Open gas remote switch if
present.
• Open the cylinder's valve.
• Firmly press the green reset
button on the high pressure
hose.
• Hold depressed the gas-flow
monitor's green button on
the gas-pressure regulator for
about five seconds (repeat if
necessary).
• Start the gas-burning devices if
desired.
If the gas cylinders are closed,
SecuMotion may switch off after
an extended period of no usage.
10
Changing a gas cylinder
Please use the included screwing
tool to attach and remove the
high pressure hoses. It will help
you generate the necessary tight-
ening torque and will prevent
damage to the screw fittings,
which may otherwise result from
using an improper tool.
Residual gas: No smoking!
No open flames!
• Close the empty gas cylinder's
valve.
• Remove the high pressure
hose from the gas cylinder and
remove the clip-on adapter, if
present.
• Attach the high pressure hose
to the full gas cylinder and
apply the clip-on adapter, if
present.
• Open the full cylinder's valve.
• Press the hose-break safety
device and the gas-flow
monitor (see „Taking into
operation").
Anytime after making
changes, check the hose
connection to the cylinder valve
for leaks (see „Checking for leaks
in the high pressure area").
Exchanging hoses
Please use the included screwing
tool to attach and remove the
high pressure hoses. It will help
you generate the necessary tight-
ening torque and will prevent
damage to the screw fittings,
which may otherwise result from
using an improper tool.
Residual gas: No smoking!
No open flames!
• Close the gas cylinder's valve.