Sony MFM-HT75W Guide De Configuration Rapide page 3

To view the Operating Instructions
on the CD-ROM
Note
To view the Operating Instructions on the CD-ROM,
Macromedia Shockwave Player and Adobe Acrobat Reader
(version 6.0 or later) must be installed on your computer. The
"installs" folder on the CD-ROM contains the installation
programs for them.
If you want to install those programs, open the "My
Computer" and right-click on the CD-ROM drive, then select
"Explore" and open the "installs" folder. (for Windows only)
If you are using a Macintosh computer:
Double-click on the CD-ROM icon to open the window, then
double-click on the "MONITOR" icon.
To view the Operating Instructions
The Operating Instructions files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your computer.
After a while, the introductory page of the CD-ROM will open
automatically.
If the introductory page does not appear automatically, open the Operating
Instruction file directly. (for Windows only)
1 Open the "My Computer."
2 Right-click the "CD-ROM" drive, and select "Explore."
3 Open the "manuals" folder.
4 Open the "HT" folder.
5 Open the "UC" folder.
6 Select and open the "HT_75W_95_**.pdf."
("**" in the file name stands for the language in which each PDF file
is written. For example, HT_75W_95_US.pdf is written in the US
English.)
To exit from the CD-ROM
Click "EXIT/CD-ROM."
Setup
Unpacking
Make sure your carton contains everything listed below.
• LCD display
• Remote control
• Size AAA batteries (2)
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• 75-ohm coaxial cable
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• This Quick Setup Guide
Connecting your display
Connect your display to a computer or other video equipment.
• Turn off the display, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
1
Open the stand.
2
Remove the connector cover.
3
Connect your display to a computer or other video
equipment.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
4
Connect your display to an antenna using the 75-
ohm coaxial cable (supplied), if necessary.
5
Connect the supplied power cord securely to the
display's AC IN connector.
6
Connect the other end securely to a power outlet.
For PC 1/PC 2
DVI-D Audio
DVI-D
DVI-D video signal
cable (supplied)
audio cord
(supplied)
HD15-HD15 video signal
cable (supplied)
75-ohm coaxial cable (supplied)
5
to AC IN
to power outlet
6
power cord (supplied)
2
connector cover
HD15 VHF/UHF
HD15
4
3
3
(US)
US