Thermoplan Nespresso AGUILA AG440PRO Manuel De L'utilisateur page 15

CAUTION
Risk of scalding
After the cleaning procedure,
remaining hot water may drop
from product outlets.
Avoid direct contact with hot
water.
Protect hands from scalding.
13
1
1
2
Use the extraction tool to pull down the
coffee outlets.
16
Pull out the drip grids for small cups (only
in vertical position) and the drip tray grill.
Clean all parts.
19
Remove the drip grids and wash them
with a soft cloth and mild detergent under
running water.
22
Remove and clean the black plastic tray
with a soap water solution.
The cleaning is completed.
14
2
Remove both coffee outlets. Properly
rinse the coffee outlets with fresh potable
water.
Clean the milk outlets with different damp
single-use tissues or paper towels.
17
2
Reinsert the the drip grids for small cups.
The drip grids for small cups can
only be removed when in vertical
position.
20
Remove the black plastic plug found in the
plastic tray.
23
To assemble the drip tray, follow the
above steps in reverse order.
15
Reinsert the coffee outlets.
18
3 s
1
The daily cleaning procedure is completed
(machine is in maximum energy saving
mode). If you need to reactivate the
machine, press the energy saving button
as per ► page 10 .
21
To remove the metal frame pull it towards
you.
At the end of the cleaning cycle
ensure that the fridge is closed
(risk of freezing).
Complete the cleaning cycle
before leaving the machine
unattended!
EN
15