Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAfE OPERATING PRACTICES
25. When the machine is running, keep your hands, feet or head away from the
revolving parts or the snow exit of the machine.
26. If you drop or bump the machine, check the main housing and parts for any
damages or cracks.
27. When stepping backwards, be cautious about any obstacles beneath your feet
or behind you to avoid falling.
28. When using the machine, if you notice the machine running in an unstable
state or hear abnormal sound from the motor, stop the machine and disconnect
the power immediately and contact your original distributor.
29. Do not store the machine while connected to the power source. It may cause
damage and injury.
30. Keep hands away from moving parts. Shut off motor and disconnect from
power before unclogging discharge chute. Be aware that even when stopped,
the auger may be jammed by a piece of ice or other object and may be under
considerable tension, which could release at any moment, causing severe
injury.
31. Safety decals and instructions are easily visible to the operator and are located
near areas of potential danger. Lost or damaged decals should be replaced.
WARNING: Avoid overtaxing your snowthrower by using it for thick, heavy (wet)
!
snow or to clear snow over 23 cm (9 inches) deep.
WARNING: Restrict the use of this power machine to persons who read,
!
understand and follow the warnings and instructions in this manual and on the
machine.
WARNING: The warnings, cautions, and instructions detailed in this manual
cannot cover all possible conditions and situations that occur. It must be
!
understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS that cannot be built into this product, but MUST BE SUPPLIED BY
THE OPERATOR.
WARNING: DO NOT OPERATE machine until it has been assembled and set
up according to the instructions in "ASSEMBLY INSTRUCTIONS". Read and
!
follow all safety rules within this Instruction Manual. Failure to do may result in
serious personal injury.
SPECIfICATIONS
Rated voltage
Current
Rotation speed
Clearing depth
Clearing path width
Max. throw
Max. clearing capacity
Weight
120V ~ 60 Hz
13 Amps
2100 rpm
22.9 cm (9")
49.8 cm (19.6")
5 - 6 m (16 - 20 ft.)
200 m
/hr (≈2153 sq. ft.)
2
15.1 kg (33.3 lb.)
7
090612
Publicité
Table des Matières
