Snow Devil WSE2013 Manuel D'instruction page 14

MAINTENANCE
STORAGE
1. Allow the unit to cool and clean the unit before storing or transporting. Be sure
to secure the unit while transporting.
2. Disconnect the extension cord from the snowthrower.
3. Inspect the extension cord closely for signs of wear or damage. Replace it if it
is worn or damaged.
4. Inspect the snowthrower carefully for worn, loose, or damaged parts. Check
connections and screws and tighten if necessary.
5. Store the unit, along with the disconnected extension cord, in a locked, dry
place our of the reach of children to prevent unauthorized use or damage.
Cover loosely with a tarp for added protection.
WARNING: Repairs should be made by an authorized repair centre. Opening
this tool could invalidate your warranty.
NOTE: With regard to the warranty, the following are deemed consumable parts:
cotter pins, shear pins, shave plate, auger belt, skid shoes, etc., and thus not
covered.
NOTE: In case your tool does not function correctly (broken, missing parts, etc.),
do not return it to the store. Please call our toll-free service line at 1-866-393-
3968 to speak to a technician.
WARRANTY
All products distributed by Airco Hong Kong Ltd. are warranted against
manufacturers' faults and defects for a period of one year from the date of
purchase by the end user. The Company will REPAIR OR REPLACE, AT ITS OWN
OPTION, merchandise deemed by the company to be defective, provided that
is has not been misused, abused, altered, or repaired by anyone other than an
authorized repair centre. Retain proof of purchase.
This warranty does not extend to parts deemed consumables, such as brad and
staple gun driver blades, grinding discs, electric motor brushes, welding contact
tips, etc. All warranty claims must have prior authorization and must be shipped
prepaid to an authorized repair depot, accompanied by a copy of the invoice
specifying the date that the item was sold to the end user.
14
WSE2013
!