Electrical Safety - Snow Devil WSE2013 Manuel D'instruction

TABLE Of CONTENTS
„ Important Safe Operating Practices .............................................................. p.3
„ Specifications ................................................................................................ p.7
„ Functional Description ................................................................................... p.8
„ Assembly Instructions ................................................................................... p.8
„ Operating Procedures ................................................................................... p.9
„ Maintenance .................................................................................................. p.12
„ Warranty ........................................................................................................ p.14
„ Parts List ....................................................................................................... p.15
„ Schematic Drawing ....................................................................................... p.16
IMPORTANT SAfE OPERATING PRACTICES
IMPORTANT: Read, understand and follow all instructions on the machine and
!
in the manual before attempting to assemble and operate. Keep this manual in a
safe place for future and regular reference and for ordering replacement parts.
WARNING: This symbol points out important safety instructions which, if not
followed could endanger the personal safety and /or property and others. Read
!
and follow all instructions in this manual before attempting to operate this
machine. Failure to comply with these instructions may result in personal injury
When you see this symbol—heed its warning.
DANGER: This machine was built to be operated according to the rules for safe
operation in this manual. As with any type of power equipment, carelessness
!
or error on the part of the operator can result in serious injury .This machine
is capable of amputating hands and feet and of throwing objects. Failure to
observe the following safety instructions could result in serious injury or death .
To use this tool properly, you must observe the safety regulations, the assembly
instructions and the operating instructions to be found in this manual. All persons
who use and service the machine must be informed about its potential hazards
and must be acquainted with this manual. Children should be supervised at all
times if they are in the area in which the tool is being used. It is also imperative that
you observe the accident prevention regulations in force in your area. The same
applies for general rules of occupational health and safety.
WARNING: When using electrical equipment, basic safety precautions, including
the following, should always be followed to reduce the risk of serious personal
! injury and/or damage to the unit. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury. Read all these
warnings and instructions before operating this product. Save this Instruction
Manual for future reference.

ELECTRICAL SAfETY

1. Electrical plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
3. Do not expose electrical equipment to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
3
090612