Check to make sure you have all these parts from the package:
Showerhead with Hose
Cap
Adapter
Handle Knob with
Lever
For safe operation of the handshower, please observe the following:
Recommended operating pressure:
Minimum pressure.........20 psi (0.14 MPA)
Maximum pressure........80 psi (0.14 MPA)
Do not reverse the hot and cold water inlets.
Do not use steam for the hot water supply.
Do not use the product at an ambient temperature below 32°F (0°C).
Do not disassemble the ceramic valve.
INCLUDED PARTS
Shower Holder
Body
Lock Nut
OR
WARNINGS
Hex Wrench
Cartridge
Screw
3
Gasket
Extension
Escutcheon
Handle Knob with
Set Screw