Evolution R230RCP Notice Originale page 5

www.evolutionpowertools.com
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a hand held
reciprocating saw and has been designed
to be used with special Evolution blades.
Only use accessories designed for use in
this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade,
and with the workpiece contact plate
firmly on the workpiece, this machine can
be used to cut:
Wood
Mild Steel, Aluminium, and
many other non-ferrous metals.
Most plastics.
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a hand held
reciprocating saw and must only be used
as such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this instruction manual.
WARNING: This machine must not be used to
cut any material that may contain asbestos.
If the presence of asbestos is suspected,
consult the relevant authorities for advice.
WARNING: This machine is not intended
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
ELECTRICAL SAFETY
This machine is fitted with the correct
moulded plug and mains lead for the
designated market. If the mains lead or
the plug are damaged in any way, they
must be replaced with original replacement
parts by a competent technician.
OUTDOOR USE
WARNING: For your protection if this tool is to
be used outdoors it should not be exposed to
rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current device (R.C.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check
the operation of the residual current device
(R.C.D.) before using the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers instructions should be
followed when using an extension cable.
POWER TOOL GENERAL
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specified in EN 62841-1:2015,
EN 62841-2-11:2016)
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool"
in the warnings refers to your mains-
operated (corded) power tool or battery-
operated (cordless) power tool.
1) General Power Tool Safety
Warnings [Work Area Safety]
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gasses or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders
away while operating power tool.
Distractions can cause you to lose control.
2) General Power Tool Safety
Warnings [Electrical Safety]
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed
5
EN