Honda UMK435T Manuel De L'utilisateur page 50

3. Cutting attachment replacement
Nylon-line cutting head:
To avoid severe personal injury, make sure that the engine switch is
in the OFF position to prevent accidental starting.
Use a genuine Honda replacement cutting head or its equivalent.
Wear heavy gloves to protect your hands when replacing the cutting
head.
1. Stop the engine and remove the spark plug cap.
2. Insert a 4 mm hexagon wrench into the locking tool hole to keep the
drive shaft from turning.
3. Turn the cutting head assembly clockwise to remove it from the gear
case. Replace it with new one.
CUTTING HEAD
ASSEMBLY
The line feeding action of the semi-automatic line feed type cutting
head (see page
4 mm HEXAGON WRENCH
29 ).
LOCKING TOOL HOLE
GEAR CASE
47