Honda UMK435T Manuel De L'utilisateur page 52

4. Grass deflector replacement
Install the grass deflector in the proper position securely to protect
you from the debris that are thrown from a wheeling cutting
attachment.
Wear heavy gloves to protect your hands, when working around the
cutting attachment.
Installation position of grass deflector
Nylon-line cutting head equipped:
Place the plate holes A and B pointing up. Then, put together the plate
holes A and B and the deflector holes 1, 2, 3 and 4, and fix them by
using 5 × 20 mm socket bolts.
Cutting blade equipped:
Place the plate holes C and D pointing up. Then, put together the plate
holes A and B and the deflector holes 3, 4, 5 and 6, and fix them by
×
using 5 20 mm socket bolts.
Tighten the bolts securely. Torque the bolts to:
5.2 N·m (0.53 kgf·m , 3.8 lbf·ft)
GRASS DEFLECTOR
PLATE
49