KES E-light MED-210 Mode D'emploi page 21

At last , tighten the screws
At last , tighten the screws
Those four contact pins are easy to bend if you don't find the accurate position
Ces 4 broches de contact se tordent facilement si vous ne trouvez pas la
Those four contact pins are easy to bend if you don't find the accurate position
position adéquate.
Loosen the screws.and press the two gray buttons simultaneously ,then unplug the handpiece
déserrer les vis. presser les deux boutons gris simultanément, déconnecter
Loosen the screws.and press the two gray buttons simultaneously ,then unplug the handpiece
ensuite la pièce à main.
13) Conformément à l'image 4.8 changeable of the various wavelengths by 430,
13. According to the following figure 4.8 changeable of the various wavelengths by 430, 530, 640
530, 640 ~1200nm filter of KES standard specification for spot size : 12x30mm
~1200nm filter of KES standard specification for spot size: 12x30mm of MED-130C.
13. According to the following figure 4.8 changeable of the various wavelengths by 430, 530, 640
of Med-130C.
~1200nm filter of KES standard specification for spot size: 12x30mm of MED-130C.
The
[ e-light Med-210 - Mode d'emploi - page 21 ]
Figure 4.5

!
notIFICAtIon
image 4.6
Figure 4.6
Figure 4.6
The upper side
upper side
NOTICE
Figure 4.5
NOTICE
The lower side
The lower side
Page 21
Page 21
User's Manual
User's Manual