Before Use - SOLAC CB8981 Mode D'emploi

If any of the appliance casings breaks, im-
•
mediately disconnect the appliance from the
mains to prevent the possibility of an electric
shock.
Do not use the appliance if it has fallen on the
•
floor, if there are visible signs of damage or if
it has a leak.
When the appliance is placed on its support,
•
make sure that the surface on which it is pla-
ced is stable.
CAUTION: In order to prevent overheating do
•
not cover the appliance.
Do not use the appliance in association with a
•
programmer, timer or other device that auto-
matically switches it on.
Keep the appliance away from heat sources
•
and sharp edges.
Supply cord should be regularly examined for
•
signs of damage, and if the cord is damaged,
the appliance must not be used.
Do not leave the appliance out in the rain or
•
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
Do not use the appliance in the case of per-
•
sons insensitive to heat (the appliance has
heated surfaces).
use and care:
Fully unroll the appliance's power cable before
•
each use.
Do not use the appliance if it is empty.
•
Do not turn the appliance over while it is in use
•
or connected to the mains.
Do not fold the appliance.
•
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Do not store the appliance if it is still hot.
•
Do not store the appliance on areas where the
•
temperature could be lower than 2ºC
Do not expose the appliance to extreme tem-
•
peratures.
Never leave the appliance connected and una-
•
ttended if is not in use.
Do not use the appliance with pets or animals.
•
service:
CB8981_bolsa agua.indd 8
Make sure that the appliance is serviced only
•
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTrUCTIONS fOr USE

BeFore use:

Remove the appliance's protective film.
•
Make sure that all the product's packaging has
•
been removed.
ImpOrTANT
NEVER FILL THE WATER BY YOUR SELF,
•
product is full, product must be always water
light, if the water bag have a leakage, replace
the full bag in an official post sales service
use:
Unroll the cable completely before plugging it
•
in.
Attach the appliance to its base / connector
•
making sure that it is correctly fitted into place.
Ensure that the electronic connector is proper-
•
ly attached to the appliance.
Connect the appliance to the mains.
•
Plug in horizontal position, VERY IMPORTANT
•
(Fig.1).
Open the cover (Fig.2).
•
The red pilot light comes on, fixed in charging
•
mode
Leave to heat up for a few 10 Minutes, pilot
•
light off automatically.
Wait until the pilot light red has gone out which
•
will indicate that the appliance has reached an
adequate temperature.
stand-By Function:
In order to save energy, the charger passes to
•
stand-by after the charge.
To return to normal operation simply wait and
•
insure that the product is totally cool
once you have Finished using the
appliance:
Unplug the appliance from the mains.
•
saFety therMal protector:
The appliance has a safety device, which pro-
•
tects the appliance from overheating.
CLEANING
Disconnect the appliance from the mains and
•
EN
6/7/16 7:34