Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning
Cleaning the Image Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of the
image data may deteriorate. Clean the glass every 6 months or every 100,000
passes.
Follow these steps to clean the glass.
1.
Open the scanner cover. (See "Opening the Covers" on page 11.)
2.
Lightly wipe the glass areas shown in the picture below with a soft, dry cloth.
CAUTION:
Do not use synthetic detergent, benzine, water, or other liquid for cleaning. Doing so
may result in a stain.
Never apply any liquid directly to the glass of the scanner.
When the glass of the scanner is smeared with oil, grease or other unremovable
substance, wipe it with a cloth lightly dipped in alcohol.
3.
Close the scanner cover firmly until it clicks in place.
Note:
It is recommended to clean the image scanner once per week or once every 2,000
checks for good reading results.
18 CaptureOne User's Manual
Publicité
Table des Matières
