Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Processing Documents
The TM-S1000 is capable of performing the following four actions on a document
in a single pass: scanning the image of both the face and the back, reading
magnetic characters, and franking.
Flow of Single Pass Processing
5
1.
Insert a document into the feeder section.
2.
The scanner scans the images of the face and back.
3.
The scanner reads the magnetic characters on the document.
4.
The franking section prints a pattern.
5.
The document is fed to the outlet.
Notes on Processing Documents
❏
Do not use documents smaller than 120 × 68 mm {4.72 × 2.68 in} (W × H).
❏
Do not use documents larger than 235 × 120 mm {9.25 × 4.72 in} (W × H).
❏
Do not use documents whose thickness or weight is out of the specified
range.
❏
Do not use copy paper or other multi-ply paper.
❏
Make sure that the documents have no curl, bending (especially on the
corners), warpage, or wrinkles.
❏
Do not use checks with paper clips, staples, adhesive tape, or other foreign
materials attached.
❏
Do not open the covers while processing is in progress.
14 CaptureOne User's Manual
4
1
3
2
Publicité
Table des Matières
