Cleaning And Maintenance - elem ASB40LI-2A Traduction Des Instructions D'origine

Working with the vacuum
Start the vacuum and vacuum the material.
▪
When you feel the catcher is full, stop the
▪
machine, disconnect the catcher and empty it.
Once the catcher is empty, connect again
▪
before starting to work again.
Provide adequate lighting or good lighting conditions
when working with the machine. Poor lighting/light
conditions represent a high safety risk.
Do not use the appliance in bad weather, especially
when there is a risk of storm.
Risk of injury by rotating
• Keep your hands in safe distance.
• Never use the machine with a damaged cover or
protective device or without cover or protective
devices.
• Remove the battery pack before starting any
adjustment, cleaning and maintenance work on
the device.
• Wait until all rotating parts have stopped and the
appliance has cooled down.
• When operating the machine, ensure that it is
positi-oned securely, in particular on slopes.
• Avoid abnormal body posture.
• Walk! Never run!
• Be careful when going backwards – risk of tripping!
• When working, keep the appliance firmly with both
hands and with a distance from your body.
• When feeding material, never stand on a level
higher than the level of the base of the machine.
• Before starting the machine, make sure that the
feeder is empty.
• Keep your face and body away from the feeding
chute.
• Do not allow hands, other parts of the body or
clothing to be placed in the feeder, in the ejection
channel or near moving parts.
• Do not stand in the ejection zone when operating
the machine.
• The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
• Always switch the machine off before attaching or
removing the collection bag.
• Switch the machine off if it becomes blocked,
before removing the blockage. Do not transport the
machine if the energy source is running.
• Remove the rechargeable battery before carrying
out any setting, cleaning or maintenance work on
the device.
WARNING
impeller.
If the appliance starts
abnormally vibrating,
switch the engine off and
search for the cause
immediately. Generally,
vibrations are a warning
against operating failure.
Stop the device and disconnect it from the power
supply
• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the
device
• after contact with a foreign object, to check the
device for damage
Removing blockages
In the event of a blockage, switch the device off
immediately and wait until the machine has stopped
completely. Then remove the object.

CLEANING AND MAINTENANCE

Remove the battery pack before
justment, cleaning and
maintenance work on the
device. Wait until all rotating
and the appliance has cooled
• Keep the device, in particular the air vents, clean
at all times. Never spray water on the device body! •
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
• The collection bag should be emptied regularly to
always maintain the best level of performance.
• Check all screw and plug-in connections and
protective equipment if firm and tightened properly
and whether all moving parts are running smooth
whenever the appliance is to be put into operation.
• Use only original accessories and original spare
parts.
• Using other spare parts can result in
accidents/injuries of the user. The manufacturer will
not be liable for any such damage.
• Please contact our service department if you need
accessories or spare parts.
• Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents
and injuries.
Repairs and works specified in these Instructions
may only be performed by qualified authorised staff.
WARNING
DANGER
starting any ad-
parts have stopped
down.
29