Safety Instructions - Indexa VT35 Set Mode D'emploi

Mains adapter
Power supply: 100-240 V
Power output: 15 V
Application: indoor use only
5. Equipment
Indoor station VT35M (see Fig. A)
1 monitor
2 door release button
3 monitor OFF button
4 monitor ON button
5 talk button
6 microphone
7 terminals
8 connection for mains adapter
9 cable channel
10 keyhole slot
11 loudspeaker
12 plug
13 fixing screws
14 wall bracket
15 fixing hole
16 lug
17 mains adapter
Indoor station VT35C (see Fig. C)
18 cover plate
19 daylight sensor
20 camera lens
21 infrared LEDs
22 microphone
23 loudspeaker
24 doorbell button with nameplate
25 fixing hole
26 terminals
27 slot
28 flush mount housing
29 fixing hole for outdoor station
30 cable hole
31 surface mount housing
32 fixing hole for outdoor station
33 cable hole
34 fixing hole
35 mounting screw
36 plug
37 machine screw
Connection diagram (see Fig. D)
38 electric door release (option)
GB - 22
~ AC, 50-60 Hz
"
DC, 1 A

6. Safety instructions

The following instructions are provided for your safety and satisfaction during
operation of the machine. Note that non-observance of these safety
instructions results in significant risks of accident.
Danger! If this point is not heeded life and health is endangered.
!
Do not leave small children unsupervised with the product, packaging
material or small parts. Otherwise there is a risk of fatal injury due to
choking.
!
Perform the connection and installation while the mains power is
disconnected! Otherwise there is a risk of fatal injury due to electric
shock.
!
Do not damage any gas, electricity, water or telecommunication lines
during drilling and fixing work. Otherwise there are dangers of personal
and fatal injury.
!
Treat the supply lines carefully. Lay these so that they cannot be
damaged and do not present any tripping hazard. Fix the cables
sufficiently. Do not pull the cables over sharp edges and do not crush or
crimp them elsewhere. Otherwise there are dangers of personal and
fatal injury.
!
Do not place the equipment near fire, heat or long lasting high
temperature effects of more than +45 °C. Otherwise there is a risk of
fatal injury due to fire.
!
Do not connect any external voltage to the connection terminals.
Otherwise there are dangers of personal and fatal injury and fire.
!
Use a mains adapter near to the indoor station and keep it easily
accessable.
!
Plug the mains adapter for the mains power connection into the mains
socket completely. Do not touch it with wet hands. Otherwise there is a
risk of fatal injury due to electric shock.
!
Only operate the indoor station and the mains adapter in dry areas. Do
not expose them to dripping or splash water. Only clean the equipment
with a dry and, if necessary slightly moist, cloth. Do not submerge the
equipment in water. Otherwise there is a risk of fatal injury due to
electric shock and fire.
!
Do not connect any damaged device (e.g. transport damage) and
disconnect the power supply immediately in the case of damage.
Unplug the mains adapter from the mains socket. Arrange for the
damage to be repaired immediately by a specialist. Otherwise there is a
risk of fatal injury due to electric shock and fire.
!
Only operate the system with 15.0 V DC from the supplied power supply.
Before connecting the power supply to the mains, ensure that the mains
current complies with 230 V AC, 50 Hz and is fitted with a fuse according
to regulations. Otherwise there is a risk of fatal injury due to electric
shock and fire.
!
Protect the equipment and the cables against strong magnetic or
electrical fields and against strong mechanical loads and vibrations.
!
Only have repairs carried out by authorised and trained qualified
personnel. Otherwise there is a risk of damage due to improper use and
invalidation of the warranty.