Connect The Usb Cable - Hewlett Packard Scanjet Enterprise 9000 Guide De Démarrage Rapide

Chapter 1
3. If the green LED is on, plug the power supply into the back of the scanner (1), and
then press the Power switch on the back of the scanner to the on position (2).
1

Connect the USB cable

CAUTION:
scanner to your computer with the USB cable. See "Install the software" on page 2.
Use the USB cable that came with the scanner to connect the scanner to the computer.
Connect the square end of the cable to the scanner and the rectangular end of the cable
to the computer.
NOTE: HP recommends using a USB port on the back of the computer for a more
reliable connection to the scanner.
4 HP Scanjet Enterprise 9000 Scanner
Be sure you install the HP scanning software before connecting the
2