Care And Maintenance - KIKKA BOO MADRID Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
1. PARTS
2.1 Unfolding the frame: Release the folding lock.
2.2 Unfold the frame fully until the " click" sound (Figure 2.3).
3.1 Assembly the front wheels.
3.2 Assembly the rear wheels.
3.3 Activate and deactivate the front wheel only forward.
3.4 Disassembly the front wheels.
3.5 Disassembly the rear wheels.
4.1;4.2;4.3;4.4;4.5 Assembly the seat to the frame.
4.6;4.7;4.8;4.9 Disassembly of the seat frame from the frame.
5. Installation and disassembly of the bumper bar.
6.1 Adjusting the backrest: Adjust automatic to desire position.
6.2 For newborns ALWAYS use a fully lying position on the backrest.
7.1 Mounting the canopy. 7.2 Adjusting the canopy. 7.3 Disassembly the canopy.
8. Adjust the leg rest pad. 9. Activating the brakes.
10. Use of harness system.
11. Folding the stroller.
12. ALWAYS ACTIVATE THE BRAKES WHEN YOU TAKE OUT THE CHILD OF THE STROLLER OR PUT THE CHILD IN .
13. Attaching the foot cover.
14. Cup holder.
15. Place the carrycot.
16. Installation of the carrycot.
17. Once the seat has been removed, push the connectors inwards into the pushchair frame.
18.1;18.2 Install the carrycot to the frame.
18.3;18.4 Deinstall the carrycot from the frame.
18.5 Once the baby basket has been removed, push the connectors back into the pushchair frame.
19. Adjusting the canopy for the carrycot.
20. Installing the car seat.
21.1;21.2 Install the car seat to the frame.
22. Once the seat has been removed, push the connectors inwards into the frame of the pushchair.
23.1;23.2 Disassembly the car seat from the frame.
24. Once the baby basket has been removed, push the connectors back into the frame of the pushchair.
25. Using the harness system for the car seat.
26. Always place the car seat handle as a support when placing the car seat out of the car.
27. Do not use the car seat for long periods of child's sleep.
28;29. Installing the seat belts when installing the car seat in the car.
30. Please follow gure 30 when installing the car seat in the car.
Do not install the child seat on the front seat with an air cushion as it will cause death or serious injury if the airbag is activated. Always
mount the car seat in the rear seats.

CARE AND MAINTENANCE

• Please note the textile label on product. • Please check on a regular basis that the brakes, wheels, latches, connecting elements, belt
systems and seams are properly functional. • Do not expose the product in strong sunshine. • After use in rain or snow, the wheels should
be lubricated and the vehicle dried to prevent rust. • Care for, clean and check this product regularly. • Do not use accessories that have
not been approved by the manufacturer.
ENGLISH

Publicité

Table des Matières
loading

Table des Matières