Product Features; Declaration Of Conformity - Bosch PST 700 PE Notice Originale

OBJ_BUCH-250-004.book Page 24 Wednesday, December 10, 2008 12:51 PM
24 | English

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Thumbwheel for stroke rate preselection
(PST 800 PEL/PST 900 PEL)
2 Lock-on button for On/Off switch
3 On/Off switch
4 Vacuum hose*
5 Vacuum connection
6 Saw blade storage
7 Base plate
8 Adjusting lever for orbital action
9 Switch for sawdust blowing device
10 Nose for dust cover
11 Sliding shoe (PST 900 PEL)
12 Saw blade*
13 Dust cover for vacuuming*
14 Contact protector
15 Laser line On/Off switch
(PST 800 PEL/PST 900 PEL)
16 Laser module (PST 800 PEL/PST 900 PEL)
17 Batteries (PST 800 PEL/PST 900 PEL)
18 Battery lid (PST 800 PEL/PST 900 PEL)
19 Latch of battery lid
(PST 800 PEL/PST 900 PEL)
20 Laser warning label
(PST 800 PEL/PST 900 PEL)
21 Exit opening for laser beam
(PST 800 PEL/PST 900 PEL)
22 Laser viewing glasses*
23 Stroke rod
24 SDS clamping lever for saw blade release
25 Guide roller
26 Splinter guard*
27 Screw (PST 700 PE/PST 800 PEL)
28 Base plate holder
(PST 700 PE/PST 800 PEL)
1 609 929 N32 | (10.12.08)
29 Scale for mitre angle
30 Thumbwheel for pre-tension of base plate
(PST 900 PEL)
31 Base plate clamping lever (PST 900 PEL)
32 Lead for the parallel guide
33 Locking screw for parallel guide*
34 Parallel guide with circle cutter*
35 Centring tip of the parallel guide*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Declaration of Conformity

PST 700 PE: We declare under our sole respon-
sibility that the product described under "Tech-
nical Data" is in conformity with the following
standards or standardization documents:
EN 60745 according to the provisions of the di-
rectives 2004/108/EC, 98/37/EC (until
28 Dec 2009), 2006/42/EC (from 29 Dec 2009).
PST 800 PEL/PST 900 PEL: We declare under
our sole responsibility that the product de-
scribed under "Technical Data" is in conformity
with the following standards or standardization
documents: EN 60745, EN 60825-1 according to
the provisions of the directives 2004/108/EC,
98/37/EC (until 28 Dec 2009), 2006/42/EC
(from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 20.11.2007
Bosch Power Tools