Focal Professional TRIO6 Be Manuel D'utilisation page 18

TRIO6 Be
U s e r m a n u a l
18
FOcus mOde
6 - InpuT
This input is for connecting the footswitch controller or for receiving the signal from the OUTPUT of the FOCUS mode of a
TRIO6 Be monitor.
7 - OuTpuT
This output is for connecting a TRIO6 Be monitor to another TRIO6 Be monitor.
Make sure you use an instrument-type cable with 2x 6.35 mm mono jacks to connect the footswitch to a TRIO6 Be, and to
connect two TRIO6 Be monitors.