Electric Connections - Brandt BPI163DUB Manuel D'instruction

INSTALLATION INSTALLATION
Important
If your hob is located above your oven, the hob's thermal safety devices can impede the simultaneous
use of the hob and the oven's pyrolysis programme, display code "F7" in the control zones. In such
circumstances we recommend that you increase the hob's ventilation by creating an opening in the side
of the cabinet (8 x 5 cm).

Electric connections

These hobs must be connected
to the power grid via an all-pole
cut-off device that complies with
installation regulations in effect.
A disconnection device must be
incorporated into the fixed wiring.
Identify the type of cable of your hob according to
the number of wires and colours.
When switching your hob on or after a lengthy
power cut, a code is shown on the control pad
(this display is reserved for your after-sales ser-
vice, where applicable. The user of the hob does
not need to take notice of it).
This information disappears after around
30 seconds.
EN
11