Engine Ignition - Ayce NT 534 Série Manuel D'utilisation

3.2 II

3.2 Engine ignition

During ignition, follow the instructions in the engine manual.
• Manual ignition models
Pull the cutting means brake lever (1) against the handle and firmly
tug the knob on the ignition cable (2).
• Electric key ignition models
Pull the cutting means brake lever (1) against the handle and turn the
ignition key (3).
• Electric push-button ignition models
Insert the consent key (4) firmly in its seat, then pull the cutting means
brake lever (1) against the handle, press the ignition button (5) and
hold until the engine is running.
3.3
I
3.3 Mowing the lawn
The appearance of the lawn will improve if
you alternate cutting in both directions at the
same height. When the grass catcher is too
full, grass collection is no longer efficient
and the sound of the lawnmower changes.
To remove and empty the grass catcher.
• stop the engine and wait for the
cutting means to stop;
• lift the rear discharge guard,
grasp the handle and remove the
grass catcher keeping it in an
erect position.
110
II
111