Ingress Protection; Commissioning - Mettler Toledo SLF6 Série Guide De L'utilisateur

4.3 Ingress Protection

SLF6-Series load cells have an IP rating of IP66/68 in weighing configuration.

4.4 Commissioning

SLF6-Series load cells can be put into operation by following these steps:
1 Install the load cell in the place of use.
2 Build a proper weighing platform.
3 Add custom-specific parts.
4 Switch on power.
5 Wait until warm-up period is over (at least 30 minutes after power-up).
6 Perform the necessary internal or external adjustment before starting weighing operation.
SLF6-Series Operation 11