Manual Operation; Maintenance And Cleaning - Olimpia splendid NEXYA S4 E Mode D'emploi

Masquer les pouces Voir aussi pour NEXYA S4 E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 95
(On => Stop => Start functioning)
This function is useful if the air conditioner is to be switched on before getting up and switched off after
leaving home.
The time is 20:00. If the air conditioner is to be switched on at 06:00 the next morning and switched of at 08:00.
a. Press the "TIMER ON" key (7) to display "TIMER ON".
b. Press the "TEMP" keys (4) until the value "10:00" is set near to the "TIMER ON" indicator.
c. Press the "TIMER OFF" key (8) to display "TIMER OFF".
d. Press the "TEMP" keys (4) until the value "12:00" is set near to the "TIMER OFF" indicator.
e.

3.8 - MANUAL OPERATION

Manual operation can be used temporarily if the remote control cannot be found or its batteries are discharged.
a.
b.
c.
AUTO > COOL > OFF.
This mode must be used for the inspection only.
By pressing the key a third time. operation stops and the air conditioner switches off.
To restore remote control operation, use the remote control directly.

4 - MAINTENANCE AND CLEANING

Before proceeding with any maintenance and cleaning, always make sure the sys-
tem has been switched off, using the remote control, and the power supply plug
has been disconnected from the system socket (or the upstream master isolating
They are very sharp. Cuts or injury risk.
(
)
EN - 35
NEXYA S4 E

Publicité

Table des Matières
loading

Table des Matières