Ayce MWW305-20L-1250WA Manuel D'utilisation page 48

Aspirateur eau et poussière
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important!
When wet vacuuming, the floating safety switch (5) closes when the maximum tank level is
reached. In doing so, the suction noise of the equipment will change and become louder.
You must then switch off the equipment and empty the tank.
Important!
The wet and dry vacuum cleaner is not suitable for the vacuuming of combustible liquids.
For wet vacuuming, use only the supplied foam filter.
Cable storage
(Fig. 10)
The power cable can be wound up onto the hook (17).
Fig. 10
CLEANING AND MAINTENACE
Important!
Always pull out the mains power plug before starting any cleaning work.
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible.
We recommend that you clean the appliance immediately after you use it.
Cleaning the appliance head (3) /
Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in the appliance.
Cleaning the container (7) /
Fig. 1
The container can be cleaned with a damp cloth and some soft soap or under running water,
depending on the amount of dirt.
Cleaning the foam filter (15) /
Clean the foam filter (15) with a little soft soap under running water and allow it to air-dry.
Maintenance
At regular intervals and before each use, check that the filters in the wet and dry vacuum
cleaner are securely fitted.
STORAGE
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is
raw material and can therefore be reused or can be returned to the raw material system.
The unit and its accessories are made of various types of material, such as metal and
plastic. Defective components must be disposed of as special waste. Ask your dealer or your
local council.
94 95
Fig. 1
Fig. 2
GB

Publicité

Table des Matières
loading

Table des Matières