17
ASSEMBLE
WARNING!
To prevent serious injury from accidental operation, turn the power switch of the vacuum
off and unplug the appliance from its electrical outlet before performing any procedure in
this section.
Before you connect the appliance to the mains supply make sure that the data on the
rating plate are identical to the mains data.
The appliance may only be connected to a shockproof socket.
Fitting the appliance head
(Fig. 4)
The appliance head (3) is fastened to the container (7) by the locking hook (6). To remove
the appliance head (3), open the locking hook (6) and remove the appliance head (3). When
fitting the appliance head (3), make sure that the locking hook (6) locks into place correctly.
1
1
2
3
6
8
7
13
86 87
GB
Fig. 4