Maintenance And Inspection - Metabo HPT UR 18DSAL Mode D'emploi

English
○ Should your device be too large for the radio's
external device storage case, draw the cable
through the cable access hole. (Fig. 10)
Cable access hole
Rubber cap

MAINTENANCE AND INSPECTION

WARNING:
Inspecting the mounting screws
Regularly inspect all mounting screws and ensure
that they are properly tightened. Should any of the
screws be loose, retighten them immediately. Failure
to do so could result in serious hazard.
Cleaning on the outside
When the radio is stained, wipe with a soft dry
cloth or a cloth moistened with soapy water.
Do not use chloric solvents, gasoline or paint thinner,
for they melt plastics.
Storing the Radio
Do not store the radio in the following places.
○ Within reach of or easily accessible to children
○ In humid or dusty places
○ In high temperature such as inside a car or
exposed to direct sunlight
○ In extremely cold places or directly exposed to
cold draughts
○ Where the temperature changes drastically
○ Where it is exposed to smoke or steam such as
near a cooking appliance or humidifi er
20
Fig. 10
When not in use or during inspection and maintenance, be sure
to remove the AC plug, rechargeable battery and backup batteries.
NOTE
As the recharge cable holders are designed
for standard size terminals, the holders may
not be able to securely fasten certain terminals
depending on the recharge cable used.
Service parts list
CAUTION
Repair, modifi cation and inspection of
metabo HPT Power Tools must be carried out
by a metabo HPT Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or
other maintenance. In the operation and
maintenance of power tools, the safety
regulations and standards prescribed in each
country must be observed.
MODIFICATIONS:
metabo HPT Power Tools are constantly being
improved and modifi ed to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.