Assembly And Operation; Before Use - Metabo HPT UR 18DSAL Mode D'emploi

ASSEMBLY AND OPERATION

BEFORE USE

Inserting the backup batteries
Time settings and radio station frequencies can be
saved by installing batteries in the unit.
1. To access the storage box for the backup
batteries, unlatch the tab and open the rear cover.
(Fig. 1)
Rear cover
2. Open the backup battery storage box and insert
the two AA batteries (included) into the storage
box in the direction indicated. (Fig. 2)
AA Batteries
Lid
Tab
Fig. 1
AA Battery box
Fig. 2
CAUTION
● Make sure that the batteries are correctly
oriented.
● Replace all the batteries at the same time. Do
not use old batteries and new batteries at the
same time.
● Do not discard the batteries with household
garbage or throw them into fi re.
AC adapter installation
Power can be supplied by plugging the AC adapter
(included) into a standard household outlet.
Pull back the rubber cover and connect the AC
adapter to the AC adapter port. (Fig. 3)
Next, plug the AC adapter into an electrical outlet.
Rear cover
AC adapter port
AC adapter
Rubber cover
NOTE
○ When used together with the batteries, the AC
adapter is the main power source and no battery
power is consumed.
○ When used together with the AC adapter, the
batteries will not recharge as this device has no
recharge function.
Storing the AC adapter
The AC adapter can be stored in the compartment
behind the rear cover. (Fig. 4)
English
Fig. 3
13