Listening To The Portable Music Player - Metabo HPT UR 18DSAL Mode D'emploi

English
For better reception
FM broadcasts
Adjust reception by changing the facing and angle of
the antenna.
"STEREO" will be displayed when receiving a stereo
broadcast.
Switching to monaural reception can reduce noise.
<Switching to monaural reception>
1. Press the Menu button.
2. Press the Select button and display "STEREO".
STEREO
3. Press the Enter / Information button.
4. Press the Select button and display "OFF".
OFF
5. Press the Enter / Information button to complete
setup.
AM broadcasts
Move the device and face it in a direction in which the
reception is best.
<Volume adjustment>
Use the Volume button to adjust the volume from 0
to 30.
LISTENING TO THE PORTABLE
MUSIC PLAYER
Audio can be played back from smartphones,
portable music players and other external devices.
CAUTION
Make sure to lower the volume output of the
player before playback.
NOTE
There are two types of connector cable, straight
type and L type.
Use an L type cable when connecting or storing
large external devices.
1. Open the external device storage area
Switch the radio's power OFF and open the front
cover. (Fig. 6)
16
Front cover
2. Connect an external device
Using a commercially available stereo mini-plug
connector cable (ø3.5 mm), connect the radio's
AUX input port to the audio output port of the
external device. (Fig. 7)
AUX input port
Stereo mini plug
connector cable
3. Secure the external device
The right and left holders can be moved to the
right or left by pinching the top and bottom of each
holder.
Secure the external device between the two
holders. (Fig. 8)
Holder
2
4. Playback
With the radio's power switched ON, press the
Source select button and display "AUX".
AUX
Make sure to lower the volume output of the
external device before music playback.
Volume can be adjusted through the radio.
(Volume)
Fig. 6
Smartphone
Audio output
port
Recharge
cable holder
Fig. 7
1
2
1
Fig. 8