Table Des Matières; 3/ Tools Needed; 4/ Flat Assembly (Forestay Dismantled)) - Plastimo 406-T Notice D'utilisation

I N D E X
1/ TECHNICAL SPECIFICATIONS 406-T, 609-T, 811-T
2/ DESCRIPTION OF SPECIFIC PARTS FOR EACH MODEL
2.1 - 406-T
2.2 - 609-T
2.3 - 811-T
3/ TOOLS NEEDED
4/ FLAT ASSEMBLY (forestay dismantled))
4.1 - Dismantling the forestay
4.2 - Assembly of the jib reefing system
4.3 - Assembling the last spar
4.4 - Assembling the top end stop
5/ IN SITU ASSEMBLY (directly onto the boat)
5.1 - Measuring the length of the forestay
GB
5.2 - Cutting the last spar
5.3 - Assembling the top end stop
5.4 - Assembling the spars
5.5 - Assembling the base spar
5.6 - Assembling the drum unit
5.7 - Adjusting the reefing line feeders
6/ RECOMMANDATIONS
7/ OPTIONAL EXTRAS
8/ SPARE PARTS
8.1 - 406-T
8.2 - 609-T
8.3 - 811-T

3/ TOOLS NEEDED

Tools needed :
- Hammer
- Pliers
- Comfortable bosun's chair (Plastimo).
- Allen key (4)
- Electric or hand drill
- 1 Ø4.2 mm drill
- Hacksaw
- Tape measure
- Screwdriver
- Silicone filler.
4/ FLAT ASSEMBLY
- This method consists of fully dismantling the forestay and assembling the jib reefing system while the forestay is lying flat.
- We recommend this method as it is faster.
- In certain cases the top part of the forestay cannot be dismantled, in this case::
- do an in situ assembly (see page 10)
- contact a professional who can install a universal joint on the upper part of the forestay.
ASSEMBLY INSTRUCTIONS
FOR T-SERIES
406-T 609-T 811-T
- 7 -
3
4
5
6
7
7
8
8
9
9
10
10
GB
10
11
11
11
12
12
13
14
64
65
66