Change Of Barometer Value - Schiltknecht Messtechnik ThermoAir3 Mode D'emploi

ThermoAir3
Keys: Functions:

Change of Barometer value

If the "Flow/RH" key is already pressed on switching on the
unit with the "On/Off" key (simultaneously), the indication will
show the barometer value.
+
This barometer value can be changed with the keys "Max" and
"Min".
The changed value is saved through the key "Flow/RH" and the
indication returns to the measuring mode.
This value remains saved until it will be overwritten again (even if
the instrument is switched off).
:
Indication
After switching on the unit, the version will be indicated. On the before and
including 3.7 only the old "wire-NTC" can be used, from version 4.0 only the
new "glass-NTC" can be used.
On switching on the unit, the indication reads the probe specification into the
unit, as soon as this is ended, the indication shows shortly the barometer value
and changes to the measuring mode.
The unit is now operational. Before using the instrument, let the probe
acclimate for 10 minutes, this way, the accuracy is guaranteed.
Normally the display of the indication unit shows a 2 sec. mean value which is
renewed every 0.5 sec.
36 Schiltknecht Messtechnik AG