Operating Instructions; Opening Of Probe Omnidirectional; Removing Of Protection Basket; Measuring Position - Schiltknecht Messtechnik ThermoAir3 Mode D'emploi

Operating Instructions:

Schiltknecht Messtechnik AG

Opening of Probe Omnidirectional

Remove protection cap ONLY in this position (measuring
NTC invisible)!
Pull down the probe by holding it on the protection basket
ring and secure it by turning it to the right.
Do NOT tighten too much!
If protection basket was removed, hold the probe on grey
part of probe, pull it down and turn it to the right to secure
it.

Removing of protection Basket

Unscrew the security screw and remove the basket
upward.

Measuring Position

NEVER touch the measuring NTC!
ThermoAir3
31