On/Off; Start/Stop - Schiltknecht Messtechnik ThermoAir3 Mode D'emploi

Keys: Functions:
The instrument is switched on and off with the "On/Off" key.
With Mini2Logger connected and switched on, the
"On/Off" key is used for transferring and saving individual
measurements.
The flow rate or the relative humidity are displayed in the
instantaneous mode with the "Flow/RH" key.
The indication is made via a 2 second mean value which is
recalculated and displayed every 0.5 seconds.
The indication shows m/s or relative humidity (external humidity
probe), depending on the connected probe.
The temperature of the flow probe or the external
humidity/temperature probe is indicated with the "Temp" key.
The mean value measurements are initiated or interrupted
with the "Start/Stop" key.
The indication "MEAN" flashes during the mean value
measurement.
It is also possible to define a certain mean value time for the "Rep"
key. With the key sequence "Start/Stop" and "Rep" the number of
seconds for the mean value measurement is started and counted
in the display. On reaching the desired averaging time, the
"Start/Stop" key must be pressed again. This averaging time now
remains saved on the "Rep" key until either the averaging time is
overwritten with a new time or the instrument is switched off.
Schiltknecht Messtechnik AG
ThermoAir3
33