Sony Alpha ILCE-9 Mode D'emploi page 63

Masquer les pouces Voir aussi pour Alpha ILCE-9:

Table des Matières

• Do not turn on/off or restart the computer, or wake the computer from sleep

mode when a USB connection has been established between the computer

and the camera. Doing so may cause a malfunction. Before turning on/

off or restarting the computer, or waking the computer from sleep mode,

disconnect the camera from the computer.

Disconnecting the camera from the computer

Perform steps 1 and 2 below before performing the following operations:

• Disconnecting the micro USB cable.

• Removing a memory card.

• Turning off the product.

(Safely Remove Hardware and Eject Media) in the

Click the displayed message.

• On Mac computers, drag and drop the memory card icon or the drive icon into

the "Trash" icon. The camera will be disconnected from the computer.

• On Windows 7/Windows 8 computers, the disconnection icon may not

appear. In that case, you can skip the steps above.

• Do not remove the micro USB cable from the camera while the access lamp is

lit. The data may be damaged.