ANCRAGE DE LA STRUCTURE DU SOLARIUM À LA
MAISON
Avant d'ancrer la structure du solarium à la maison, il est
primordial qu'elle soit au niveau et d'équerre.
1 - PROCÉDURE POUR LA MISE À NIVEAU
1. Déterminez le point de référence (X). Ce point sera
l'endroit de départ des mesures du solarium. Pour le
déterminer, choisissez sur les meneaux arrières, le
point le plus éloigné de la maison : (D bas) ou (D haut)
ou (A bas) ou (A haut). S'il s'agit d'un coin en haut,
projetez-le au sol. Marquez cet endroit (X) au crayon
feutre.
16
FASTENING THE SOLARIUM STRUCTURE TO THE
HOUSE
Before fastening the structure to the house, it is of utmost
importance for it to be squared and leveled.
1 - PROCEDURE TO SQUARE AND LEVEL
1. Determine the reference point (X). This spot will be the
starting point of all the measures of the solarium. To
determine this point, locate the spot that is the farthest
from the house wall on the 2 back-end mullions: (D
bottom) or (D top) or (A bottom) or (A top). If it is at top,
project it on the ground and mark it (X) with a felt pen.