English - i-tec C31HUB404 Mode D'emploi

Usb-c slim hub 4 port
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
i-tec USB-C Slim HUB 4 port
INTRODUCTION
i-tec USB-C HUB is an ideal companion for everybody who does not have
enough USB ports in his/her notebook, ultrabook or PC and who has to con-
stantly connect and disconnect his/her favorite USB equipment such as flash
disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
This HUB offers 4 USB 3.0 ports with the Plug & Play function and standard
USB charging – the HUB will automatically detect connected equipment for
USB charging. The USB 3.0 interface is important mainly for data transfers
from USB 3.0 memory cards and flash disks which will use its high transfer
speed most.
This HUB does not require installation of drivers. You will just connect it by
the USB-C cable to your computer and immediately you can start using it. This
HUB has a built in overcurrent protection of your computer in case of short
connection on the peripheries. The interface is compatible with USB 2.0.
Thanks to its compact dimensions and low weight it is an ideal companion to
your notebook when traveling.
INSTALLATION IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 AND HIGHER,
MAC OS, LINUX AND OTHERS
The HUB is installed automatically, no need install drivers. plug the HUB via
USB-C 3.1, gen. 1 cable into available USB-C port of your notebook / PC and
follow the on-screen instructions. The HUB will be installed and displayed in
Device manager as "Generic USB Hub" and "Generic USB SuperSpeed Hub".
DESCRIPTION
1. 4x output USB 3.0 ports for connecting USB equipment
2. LED diode – the diode is ON when the HUB is connected to a USB-C port of
a notebook / PC
3. USB-C 3.1, gen. 1 cable for connecting to a notebook / PC
6 |

ENGLISH

Publicité

Table des Matières
loading

Table des Matières