Package Contents; English - i-tec C31METALDP60HZ Mode D'emploi

USB-C DisplayPort 60 Hz METAL ADAPTER
INTRODUCTION
Thank you for purchasing the i-tec USB-C 3.1 DP 60 Hz Metal Adapter that
will allow you to connect DisplayPort monitor / TV / projector to a notebook,
a tablet, a PC or a smartphone with a USB­C port. It offers 1x 4K DisplayPort.
Thanks to its compact dimensions, low weight and application without a power
adaptor it is also convenient for travelling.

PACKAGE CONTENTS

• i-tec USB-C 3.1 DP 60 Hz Metal Adapter with cable (15 cm)
• Quick Start
SPECIFICATION
• 1x USB-C 3.1 connector, transfer rate up to 10 Gbps
• Graphic interface: 1x DisplayPort (spec. 1.2); max. resolution 3840x2160 / 60Hz
• Mode: Extend, Mirror and Primary Display
• Supported colors 16 / 32 bit
• Powered through USB bus (no power adapter is needed)
• Chipset: VL100
• OS: Requires USB-C interface with "DisplayPort Alternate Mode" support
(not all devices / systems with USB-C interface supports the standard) or
Thunderbolt 3 port – Windows 10 32/64bit, macOS X, Chrome OS (Google)
with Intel Broadwell Processor and R51 and higher
• Product dimensions: 45 x 30 x 15 mm
• Product weight: 27 g
DESCRIPTION OF THE ADAPTER
1. DisplayPort – for connecting a monitor
2. Connecting cable with USB-C connector – for connecting to a notebook,
tablet, PC or smartphone with "DisplayPort Alternate Mode" support
AFTER CONNECTING, THE DRIVERS FOR THE ADAPTER ARE INSTALLED
AUTOMATICALLY FROM THE SYSTEM.
4 |

ENGLISH