Dymo LabelManager PnP Démarrage Rapide page 8

Starting the Built-In Software
The built-in software resides on the label maker; no installation is required.
To start the software for Windows
If necessary, press the power button to turn on the label maker.
1
Depending on Windows AutoRun settings, the software may
start automatically.
If the software does not start automatically, do one of the following:
2
• If the AutoRun or AutoPlay dialog box appears, follow the on-screen
instructions to start the
• If the AutoRun dialog box does not appear, navigate to
My Computer
To start the software for Mac OS
If necessary, press the power button to turn on the label maker.
1
The DYMO PnP volume appears on your desktop.
Double-click DYMO PnP to open the volume.
2
Double-click
3
Disconnecting the Label Maker from Your Computer
To disconnect the label maker from your computer
(Mac Only) Drag the DYMO PnP volume to the trash.
1
Press the power button to turn off the label maker.
2
Unplug the USB cable from your computer.
3
4
®
DYMO Label Light software.
 DYMO PnP, and then click
®
to start the software.
DYMO Label Light.exe.