SMC Networks SMC2870W EZ Connect Guide De L'utilisateur page 6

Adaptateur ethernet sans fil
Masquer les pouces Voir aussi pour SMC2870W EZ Connect:
Table des Matières

Publicité

C
OMPLIANCES
Low Power License-Exempt Radio communication Devices
(RSS-210)
1. Warning Note: operation is subject to the following two conditions: (1) this device
2. Operation in 2.4GHz band: To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed outdoors
is subject to licensing.
Exposure of Humans to RF Fields for Mobile Radios Equip-
ment (RSS-102)
1. Mobile radios that are not body worn (e.g. mounted on vehicles or placed on desks,
shelves, etc.) and operated such that humans are normally separated from their
radiating element by at least 20cm are not subject to SAR tests, but must have an
RF evaluation
by the certification applicant, based on the calculated or measured field strength
value. SAR evaluation can be used if so desired in lieu of a RF evaluation of field
strength limits.
2. Exposures produced by such radios shall not exceed the exposure limits specified
in Health Canada's Safety Code 6. Health Canada' s address is:
775 Brookfield Road, Ottawa, Ontario
Canada K1A 1C1; Tel: (613) 954 -6699 / Fax:(613) 941-1734 ;
e-mail: alice_mackinnon@hc-sc.gc.ca.
EC Conformance Declaration - Class B
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2
08970 - Sant Joan Despí,
Barcelona, Spain.
This RF product complies with all the requirements of the Directive 1999/5/EC of
the European parliament and the council of 9 March 1999 on radio equipment and
telecommunication terminal Equipment and the mutual recognition of their
conformity(R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC. As of April
8, 2000.
ii
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
o
, 4
a
,

Publicité

Table des Matières
loading

Table des Matières