Charging Process; Joinon Parking - Gewiss JOINON Parking+ GW68105 Manuel D'installation Et Usage

Operation
Status
Incident
Standby
End of session
Card rejected
Select socket Current status lighting,

9.2. Charging process

9.2.1. JOINON Parking+

The electrical supply connector must not be removed from the vehicle while the charging is being
carried out.
Starting the charge process
1. Check that the charging station is in awaiting vehicle status with the green light.
2. Identify the card using the reader located on the area indicated below the display.
ABA2022IQM01_ - 7.55.4.413.0 - Installation and Operation Manual ABA2022IQM01_ - 7.55.4.495.7
Lighting
Continuous red The charging process is not being carried out correctly due to a problem.
None The charging station has been remotely shut down.
Steady white The charge has finished.
Steady white The card is not valid or has not been recognized.
Once the card has been identified, it waits for the socket selection to start
flashing the charging process.
Description
Gewiss
EN
ES
FR
IT
HU
25