Using The Precision Processor Bowl - Ninja BN800C Série Guide De L'utilisateur

Système de cuisine professional plus avec auto-iq
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE SINGLE-SERVE CUP - CONT�
6
To remove the cup from the motor
base, turn the cup counterclockwise
and then lift up.
7
Remove the Pro Extractor Blades™
Assembly by twisting the cap
counterclockwise. DO NOT store
blended contents with Pro Extractor
Blades Assembly attached. Exercise
care when handling the blade assembly,
as the blades are sharp.
14 ninjakitchen.com
8
Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
9
To enjoy your drink on the go, place
the Spout Lid onto the Single-Serve
Cup and twist lid clockwise until firmly
sealed. For storing ingredients in the
cup, use only the Spout Lid to cover.
USING THE PRECISION PROCESSOR™ BOWL
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
IMPORTANT: As a safety feature, if the
blade assembly is not fully seated, you
will not be able to install and lock the lid.
NOTE: Auto-iQ® programs have pauses
and changes in speed throughout
the cycle.
NOTE: DO NOT add ingredeints before
completing installation of the blade
assembly.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
1
Plug in motor base and place on a
clean, dry, level surface such as a
countertop or table.
2 Lower the Precision Processor Bowl
onto the motor base and rotate
clockwise until it clicks into place.
3 Exercising care, grasp the Chopping
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the bowl. Note that the Chopping
Blade Assembly will fit loosely onto
the drive gear.
4 Add ingredients to the bowl, making
sure not to exceed the MAX FILL line.
5
Place lid on the bowl, with black line on
tab aligned slightly to the right of tab
on front of bowl. Turn lid clockwise to
lock in place. When properly locked,
the white line on lid will line up with
the black line on bowl. Once the lid is
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
ninjakitchen.com
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières