Type Plate; Symbols On The Product; Safety; Safety Definitions - Husqvarna WS 442 Manuel D'utilisation

7. Hose connection, water in
8. Water hose
9. Blade flange hub
10. Outer blade flange
11. Blade guard guide
12. Blade guard
13. Track
14. Saw carriage
15. Lock handle
16. Wall support
17. Track holder
18. Connector
19. Brush
20. Tool kit
21. Operator's manual
22. Gear knob
23. Remote control (accessory)
24. Trolley (accessory)
25. Power pack (accessory)

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection.
The product or package of the product is not
domestic waste. Recycle it at an approved

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
1094 - 002 - 26.09.2019
disposal location for electrical and electronic
equipment.
This product is in compliance with applicable
EC directives.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.

Type plate

Husqvarna AB, 561 82 Huskvarna, Sweden
TYPE
SERIAL No.
(YEAR WEEK No.)
RPM
OUTPUT
POWER
MADE IN SWEDEN
• A: Type/model
• B: Product No.
• C: Serial No. with manufacturing date (YYYY, WW,
XXXXX): Year, Week, Sequence No.
• D: Maximum speed, RPM
• E: Maximum blade size, mm
• F: Power output, kW

Safety

Note: Used to give more information that is necessary in
a given situation.

General power tool safety warnings

WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
®
PRODUCT No.
A
C
D
MAX.
F
B
E
3