INFOSEC UPS SYSTEM E7 One 1000 RT IEC Manuel Utilisateur page 58

Step 7

2-5.b Battery Kit Assembly
NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
Step 1: Remove adhesive tapes.
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells and insert one
more defect battery on the space.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
58
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 07 19 AA 59 203 14
Put the front panel back to the unit.
2 battery kit
Step 2: Connect all battery terminals by
following below chart.
Step 4: Cover the other side of plastic shell
as below chart. Then, battery kit is assembly
well.