Abicor Binzel TSi Mode D'emploi page 35

TSi injection unit
9.4 Replace rubber seal
Carry out each step in accordance with the figures below:
1
A
C
B
1
Rubber seal
Fig. 11 Replace rubber seal
NOTICE
• The rubber seal to be used depends on the outer diameter of the gas nozzle. A deviation of ±1 mm in the outer
diameter of the gas nozzle is permitted.
1 Unscrew the device cover (2) using the bayonet closure and press out the rubber seal (1).
2 Replace the rubber seal (1) and press into the device cover (2).
3 Mount the device cover (2) using a bayonet closure.
BAL.0468.0 • 2021-10-28
2
D
2 3
Device cover
9 Maintenance and cleaning
4
Sealing surfaces Bayonet closure
3
4
EN - 17