Festo DPA Série Notice D'utilisation page 20

DPA−...
Complete the handlung steps as follows:
S
1. Pull the adjusting knob away from the
housing (only with DPA−...−10).
2. Turn the adjusting knob 5 as far as
possible in anti−clockwise direction
(status as at delivery).
3. Pessurize connection 1 on the DPA−...
with the input pressure.
4. Turn the adjusting knob in a clockwise
direction until the desired high pressure
is set.
The pressure states are monitored by additional control manometers in
accordance with the section Accessories".
(see Fig. 10):
manometer (A):
manometer (B):
DPA−40−...
Fig. 10
Locking:
5. Press the adjusting knob towards the housing (only with DPA−...−10).
20
input pressure
high pressure
(A) (B)
5
Fig. 8
Fig. 9
DPA−63/100−...
(A)
Festo DPA−... 0510c English
(B)