Maintenance / Service - Skil MASTERS 4585 Notice Originale

- 4 settings for fast cutting in different materials,
straight cuts only
1 = metal
2 = plastic
3 = hard wood
4 = soft wood
! always select "0" when sawing splinter-sensitive
material
• On/off 6
• Speed control for smooth starting 7
• Switch locking for continuous use 8
• Operating the tool
- before switching on the tool, ensure that front end of
footplate rests fl at on the workpiece
- hold tool fi rmly with both hands, so you will have full
control of the tool at all times
! while working, always hold the tool at the grey-
coloured grip area(s) 9
- ensure that complete surface of footplate rests fi rmly
on the workpiece
! ensure that the blade has come to a complete
standstill, before you lift the tool from the
workpiece
- keep ventilation slots J 2 uncovered
• Changing saw blades 0
! insert blade to full depth with teeth facing
forward !
• Saw blade storage @
! for T-shank blades only
• Sawing at 15°/30°/45° #
• Dust suction $a
! do not use vacuum cleaner when cutting metal
• Dust blowing $b
• Spot light %
APPLICATION ADVICE
• Use the appropriate saw blades
! tool accepts most commonly available T-shank
and U-shank blades ^
• When cutting metals, lubricate saw blade regularly with
oil
• Vibration level
The vibration emission level stated at the back of this
instruction manual (indicated by an asterisk) has been
measured in accordance with a standardised test given
in EN 60745; it may be used to compare one tool with
another and as a preliminary assessment of exposure to
vibration when using the tool for the applications
mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories, may
signifi cantly increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may
signifi cantly reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the
ventilation slots)
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skileurope.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol & will remind you of this when the need for
disposing occurs
F
Scie sauteuse
INTRODUCTION
• Cet outil est conçu pour effectuer des découpes et
coupes dans le bois, les matières plastiques, le métal,
les plaques en céramique et le caoutchouc, et est
approprié pour des coupes droites et curvilignes avec
des angles d'onglet jusqu'à 45°
• Lisez et conservez ce manuel d'instructions 3
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Interrupteur de marche/arrêt et réglage de vitesse
B Bouton de blocage de l'interrupteur
C Interrupteur de souffl erie de poussières
D Levier pour bloquer/relâcher la semelle
E Molette de réglage de la vitesse de sciage
F Levier de sélection de mode de coupe
G Rangement de lame de scie
H Eclairage
J Fentes de ventilation
10
4585