Operating Instructions; Troubleshooting; Technical Specifications - Invacare PF2405SL Manuel D'utilisation

5 A Charger
• Power Cord EU version: A certified power cord must
be used with this equipment. The relevant national
installation and/or equipment regulations shall be
considered. A certified power supply cord not lighter
ordinary polyvinyl chloride flexible cord according to
60227 IEC 52 (designation H03VV-F) shall be used.
Alternatively, a flexible cord of synthetic rubber
according to 60245 IEC 53 (designation H05RR-F) shall
be used. Power supply cord with conductors providing
a cross-sectional area of 3G, 0.75mm

1.5 Operating Instructions

Make sure the battery charger output voltage is the
same as the output voltage of the connecting battery.
1. Connect the battery charger to the charging socket of
the mobility device.
2. Connect the power cord. The yellow POWER LED
indicates that AC power is on.
For more information about charging status, refer to 1.3
LED Display, page 4 .

1.6 Troubleshooting

• If the POWER LED is off:
– Check that the charging cable is correctly connected.
– If the LED still does not light, the battery charger
may be faulty. Contact your provider.
• If the CHARGING LED is off:
– Check that the charging cable is correctly connected.
6

1.7 Technical Specifications

2 minimum.
Item
Model
Output current (DC)
Floating voltage (DC)
Input current (AC)
Input voltage (AC)
Operating temperature
Battery application
Dimensions L x W x H
Weight
Battery charger
PF2405SL
5 A
24 V Rated
2.2 – 1.1 A.
100 – 240 V, 50 – 60 Hz
0 °C – 40 °C
24 V gel or AGM batteries (16
Ah – 60 Ah)
160 mm x 100 mm x 55.5 mm
500 g
1664032-A