Multiplex SAFETY SWITCH PRO Mode D'emploi page 14

6. Functionality
· The switch cable is a safety-relevant component in the receiver power supply chain. Conventional switch cables with purely mechanical switches
provide e.g. Due to aging phenomena (vibration, wear and tear, corrosion) on the switch contacts after a certain period of use, a safety risk due to
failure. In addition, the demands on a switch cable increase due to the power requirements of modern high-performance servos.
Many conventional, purely mechanical switch cables are not up to the task.
· The receiver battery (s) is / are connected directly to the switch board of the SAFETY-SWITCH PRO. The connection to the
The receiver takes place via a direct short power supply without a mechanical switching element. The switching function is performed by
vibration-proof, fail-safe high-performance FETs, which have a very low internal resistance compared to mechanical switches. In connection with
high-quality gold contacts and large cable cross-sections, the servos can really develop their performance.
· As a switching element, you can choose the right one for you and your application from our three safety switches.
(# 1-01784 Magnetic safety switch / # 85196 Professional safety switch / # 85195 Micro safety switch)
The load current does not flow through the connected switch.
The switch only gives the ON / OFF switching pulse.
You can install the switch in any easily accessible location in the model.
14