Controlling The Status Flag; Table 3.5: Oscar Interface Status Flags; Figure 3.8: Oscar Interface Flag Dialog Box - Avocent DSR2035 Guide D'installation Et D'utilisation

Controlling the status flag

The status flag displays on your desktop and shows the name or EID number of the selected target
device or the status of the selected port. Use the Flag dialog box to configure the flag to display by
target device name or EID number, or to change the flag color, opacity, display time and location
on the desktop.
Table 3.5

Table 3.5: OSCAR Interface Status Flags

Flag
To access the OSCAR interface Flag dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Flag to open the Flag dialog box as shown in Figure 3.8.

Figure 3.8: OSCAR Interface Flag Dialog Box

desctibes each status flag.
Description
Flag type by name
Flag type by EID number
Flag indicating that the user has been disconnected from all systems
Flag indicating that Broadcast mode is enabled
Chapter 3: Local Port Operation
to open the Main dialog box.
Print Screen
33